[H3剑心比赛] Mac Studio M5 Max 40 GPU 64 GB 统一内存|MiniMax H3 3D / 2D |Draw Things 单卡一次跑完 294 帧
-
前言
重在参与。用的Drawthings, 没有调教,没有任何优化。
这次参赛没有分段、没有 LoRA、没有 turbo 加速,也没有 ffmpeg 拼接。两条 12 秒成片都是同一台 Mac Studio 上、同一个 Draw Things 项目里,一次生成 294 帧(1344×768)出来的。下面所有参数、耗时都来自 Draw Things 项目数据库里的计时 log(每条生成记录的
duration/timings),不是估算。- 3D CGI 成片:https://youtu.be/7X3QUBg-3LQ
- 传统 2D 动画成片:https://youtu.be/noVovfnEz7s
硬件 / 软件环境
- 机器:Mac Studio
- 芯片:Apple M5 Max,18 核(6 超级核 + 12 性能核)
- 内存:64 GB 统一内存
- OS:macOS 27.0.1
- 推理栈:Draw Things 26.1020.0(CoreML / Metal,纯苹果栈,没有 ComfyUI、没有 ROCm、没有 CUDA)
- 输出格式:Draw Things 原生视频 + 同步音频 → ProRes 4444(1344×768, 24 fps)+ PCM 32 kHz 立体声
M 卡跑 H3 的难点不是"跑不通",而是"跑得慢":294 帧整段生成,采样阶段占了 98% 以上的时间,单步 4 分钟上下。能一次跑完 294 帧靠的是下面几个设定。
模型档案
minimax_h3_ref2va_i8x.ckpt— 34.4 GB(Ref2VA 基座,i8x 量化)qwen_3_vl_32b_50_i8x.ckpt— 26.5 GB(Qwen3-VL-32B 文字编码器,i8x)minimax_h3_vae_f16.ckpt— 5.51 GB(视频 / 音频 VAE,FP16)- 合计约 66.4 GB 权重,全部在 64 GB 统一内存里跑
- LoRA:无(
loras: [])|upscaler:无|face restoration:无|hiresFix:关闭 - 参考图走 canvas / moodboard 喂入(比赛主帖指定的那组剑心、志志雄参考图)
关键参数(两条片子除 Style 与 seed 之外完全一致)
项 3D 版 2D 版 模型 minimax_h3_ref2va_i8x.ckpt同 分辨率 1344 × 768 1344 × 768 帧数 294 294 步数 50 50 采样器 DDIM Trailing( sampler: 16)同 Shift / Audio Shift 12 / 3 12 / 3 Text guidance 1 1 Seed 2254839087 1694873285 Seed mode ScaleAlike( seedMode: 2)同 分块解码 开启,tile 256×256,overlap 64 同 分块扩散 关闭 关闭 teaCache 关闭 关闭 maskBlur / maskBlurOutset 1.5 / 0 1.5 / 0 sharpness 0 0 batchCount 1 1 strength 1 1 这些数值就是官方 Ref2VA 的推荐起点(768 短边、50 步 DDIM Trailing、Text Guidance 1、Shift 12、Audio Shift 3),没有改动。
为什么 64 GB 能一次跑完 294 帧
- i8x 量化基座 + i8x 文字编码器:34.4 GB + 26.5 GB,这是 Draw Things 官方给 H3 的量化版本,也是 64 GB 机器唯一可行的组合。
tiledDecoding: true(tile 256×256 / overlap 64):VAE 解码按块进行,294 帧不是一次性解码,解码阶段只用了 122.6 s / 117.0 s。tiledDiffusion: false:扩散本身整块跑 —— 说明 294 帧的 latent 在 64 GB 里放得下,不需要分段。- 没有 turbo LoRA:官方 Ref2VA 基座没有 4-step turbo 分支,所以只能 50 步硬跑,这是耗时的根源。
实测耗时(取自项目 sqlite 里的
duration/timings)版本 总耗时 text_encoded controls_generated sampling image_decoded 3D 12,542.3 s(3 h 29 m 02 s) 43.8 s 22.4 s 12,353.2 s(98.5%) 122.6 s 2D 13,619.0 s(3 h 46 m 59 s) 65.8 s 5.9 s 13,430.1 s(98.6%) 117.0 s 采样阶段逐步耗时:
- 3D:首条 log 22.6 s(首块预热),其余 50 步平均 246.6 s/步,区间 238.3 – 254.4 s
- 2D:首条 log 14.7 s,其余 50 步平均 268.3 s/步,区间 259.9 – 279.4 s
2D 版比 3D 版慢 1,076.7 s(约 18 分钟),每步慢约 22 s。
成片校验
项 3D 2D 分辨率 1344 × 768 1344 × 768 帧率 / 帧数 24 fps / 294 帧 24 fps / 294 帧 时长 12.25 s 12.25 s 视频编码 ProRes 4444(ap4h) ProRes 4444(ap4h) 音频 PCM 32 kHz 立体声,非静音 PCM 32 kHz 立体声,非静音 文件大小 326 MB 305 MB 直接在 1344×768 采样,无缩放、无补帧、无裁切。
Prompt(统一英文,只切 Style)
3D 版:
Style: 3D CGI animation Masterpiece, high quality, cinematic lighting. Subject: A fierce battle sequence featuring two characters based on the reference images—a red-clad swordsman (Jianxin) and a purple-robed warrior (Zhizhixiong). Action: The camera begins with a dynamic low-angle tracking shot. The swordsman in red dashes forward with a long sword, leaving a glowing trail, while the warrior in purple stands firm and executes a sweeping counter-attack with a flaming effect. They clash in the center of the frame, creating a shockwave of energy and sparks. The camera rapidly orbits around them as the fiery battle intensifies, concluding with the red-clad swordsman landing gracefully while the purple warrior points his weapon forward, both facing the camera. Environment: Dramatic background with embers floating in the air, high contrast lighting.2D 版:开头换成
2D traditional anime,其余一字不差。画面对照
两版都完成了 prompt 要求的:红衣剑客突进、火焰横扫反击、中央交锋、镜头斜向/低角度环绕、结尾双方持刃相对。
- 3D 版:材质光滑、光影立体,人物接近手办/三维渲染质感;火星与火焰柱构成包围式构图,轮廓光明显。
- 2D 版:线条清晰、色块分明、阴影戏剧化,典型赛璐璐手绘动画调性;剑刃交错与橙黄光带形成对角线构图,红发紫眼剑客与缠脸紫袍对手的对决更"动画化"。
复现说明
附件
3D.json/2D.json就是这两条成片对应的 Draw Things 生成参数导出,逐字段可核对。同环境(M5 Max 64 GB + Draw Things 26.1020.0 + 上述三个权重)用同一 prompt、同一 seed 重跑即可复现:3D seed 2254839087,2D seed 1694873285。需要留意的两点:
- 64 GB 是这条链路的下限体验,294 帧整段扩散靠 i8x 量化才放得下;换 i6x 或加 hiresFix 会撑爆。
- 没有 4-step turbo LoRA 可用(Ref2VA 基座不支持),所以 50 步是硬成本,一条 12 秒成片约 3.5 小时。
-
-
-
版主审定:本帖设为优秀,作者 +3 积分奖励,继续加油!