抡锤者

个人体验 QFN 挺好的， 27B 上下文长就很慢

昨天刚升完0.1.42，，咋又更新了， 肝帝啊

我买的是2666 的超频 3200 使用,

如果是linux， 64G应该就能跑起来, 但比较紧张， 我是96G， 跑IQ3_S 512k上下文， 系统内存占用 57G

@J-xu 试试 时序 19/20-23-23-44/45

2933 速度 ～33G/s
3200 速度 ～38G/s

@terry strata 让7900xtx再次强大， 刚买了一张小卡 rtx2000ada， 装进另一台低功耗机器做一些简单的活儿。 识图、代码补齐之类的， 满载功耗70w。

哈哈， 和我的差不多， 我也是5600 + 96G ， 7900xtx

你的内存可以上3200 ， 调高一下时序

我也是已有的16G x 2 R1 内存 ，又买了32G x 2 的R2， 经过反复调整稳稳的跑在3200， 通过了6轮memtest测试。

GSQ的3bit 相比 通用3bit量化保留了更高精度

tihu2还行啊， 除了后衣架悬浮，其他逻辑都对

AI 新起也可能是人类肉体消亡的开始

sudo amd-smi set --fan 90

可以设置风扇速度

试试这个脚本， 最好做成服务

#!/bin/bash

# RX 7900 XTX 风扇控制
#
# Junction > 64C  ->  强制提速到 95%
# Junction <= 60C -> 由驱动自动控制
#
# 留4度余量避免频繁切换转速

GPU=0

TRIGGER_TEMP=64

RELEASE_TEMP=60

FAN_LEVEL=95

POLL_INTERVAL=5

state="auto"

cleanup() {

    if [[ "$state" == "forced" ]]; then

        echo

        echo "$(date '+%F %T') Exiting -> restoring AMD driver fan control"

        amd-smi reset --gpu "$GPU" --fans

    fi

}

trap cleanup EXIT

trap 'exit 130' INT

trap 'exit 143' TERM

while true; do

    temp=$(rocm-smi --showtemp --json 2>/dev/null |

        sed -n 's/.*"Temperature (Sensor junction) (C)": "\([0-9.]*\)".*/\1/p')

    if [[ "$temp" =~ ^[0-9]+([.][0-9]+)?$ ]]; then

        temp_int=${temp%.*}

        if [[ "$state" == "auto" && "$temp_int" -gt "$TRIGGER_TEMP" ]]; then

            echo "$(date '+%F %T') Junction ${temp}C -> fan ${FAN_LEVEL}%"

            if echo y | amd-smi set --gpu "$GPU" --fan "$FAN_LEVEL"; then

                state="forced"

            else

                echo "$(date '+%F %T') ERROR: failed to set fan speed"

            fi

        elif [[ "$state" == "forced" && "$temp_int" -le "$RELEASE_TEMP" ]]; then

            echo "$(date '+%F %T') Junction ${temp}C -> AMD driver fan control"

            if amd-smi reset --gpu "$GPU" --fans; then

                state="auto"

            else

                echo "$(date '+%F %T') ERROR: failed to reset fan control"

            fi

        fi

    fi

    sleep "$POLL_INTERVAL"

done

现在用vulkan dflash 跑 GSQ-Q3-S 256k上下文， 日常段任务解码可以到90t/s， 长任务编程40 ～ 60 t/s。 pp都是从900多1000一路掉到 400左右

ddr3, ddr4 会不会慢很多？ 稍后我也试试

我4天前发了一贴， 后发现有点问题，就删帖了。

这几天密集测试使用了一下，确实可用， 现在官方也支持rocm编译， 长上下文prefill会很慢，但能正常工作。

prefill 一路下跌

这是在7900xtx上512k上下文启动， 256k长上下文测试结果：

ctx (tokens)	depth	wall (s)	prefill (tok/s)	decode (tok/s)	gen tokens	finish	answer	hit
265085	1	777	373.7	30.1	5	stop	'AMBER-80'	yes

启动参数：

./llama-kvmem-server -m /models/unsloth/Qwen3.8-27B-GGUF/Qwen3.8-27B-Q5_K_M.gguf --mmproj /models/unsloth/Qwen3.8-27B-GGUF/mmproj-BF16.gguf --host 0.0.0.0 --port 8080 --temp 0.7 --top-p 0.85 --top-k 20 --jinja --spec-type draft-mtp --kvmem --kvmem-budget 49152 --kvmem-gen-reserve 24576 --kvmem-gpu-ratio 0.85 --spec-draft-n-max 3  --reasoning-effort medium --ctx-size 524288 --reasoning-budget 4096  -n 32767

测试脚本：

#!/usr/bin/env python3
"""Long-context probe: does the server answer a question from deep in a huge prompt?

Sends a "needle in a haystack" prompt of increasing size to a running
llama-kvmem-server and checks that the model returns the phrase buried in the
document. Prompt tokens are read back from the server's own `usage.prompt_tokens`
(not estimated), so the requested size is the real prefill length even though the
client has no tokenizer.

The one required argument is the maximum prompt size in tokens:

    scripts/long_context_probe.py 131072

That runs probes at 1/4, 1/2, 3/4 and all of the maximum, plus position probes at
the maximum (needle near the start, middle and end) to cover eviction/retrieval
at both ends of the context. Exit status is 0 only if every probe returned the
needle.

Requires no third-party packages and never starts or stops a server.

Server-side conditions this assumes (known from the running launch):
  - the server's -c is at least the requested maximum, and
  - the kvmem budget is smaller than the prompt, so eviction/retrieval is
    actually exercised. Check `curl $URL/props` if a probe passes trivially.
"""
from __future__ import annotations

import argparse
import json
import random
import re
import sys
import time
import urllib.error
import urllib.request
from pathlib import Path

DEFAULT_URL = "http://127.0.0.1:8082"

# A sentence repeated/dropped to size the haystack. Generic on purpose: the test
# is about finding an arbitrary phrase, not about any domain vocabulary.
FILLER_SENTENCES = (
    "At 04:{minute} the north yard crew logged pallet {pallet} moving between "
    "bays {bay_a} and {bay_b} while the dock light stayed green.",
    "Inventory sheet {sheet} recorded {count} empty crates and {count2} sealed "
    "drums, with no variance against the morning printout.",
    "Radio traffic at 11:{minute} covered a delayed inbound truck, a lunch "
    "rotation, and a tire pressure check on forklift {pallet}.",
    "The overcast sky and light easterly wind were noted in log entry {sheet} "
    "as expected for the season, with no impact on operations.",
)

NEEDLE_TEMPLATE = (
    "IMPORTANT RECORD: the {label} for this document is exactly {nonce}."
)

# Nonce parts are chosen so the phrase cannot be inferred, and the question never
# repeats it: only retrieval from the document can produce it.
NONCE_WORDS = (
    "ZEBRA", "ORCHID", "CINDER", "MAPLE", "QUARTZ", "FALCON", "AMBER", "PINE",
    "COPPER", "VIOLET", "GRANITE", "WILLOW", "SABLE", "TOPAZ", "CEDAR", "LANTERN",
    "MARLIN", "ONYX", "PEWTER", "RAVEN", "SORREL", "THISTLE", "UMBER", "VERDANT",
)


class ProbeError(RuntimeError):
    pass


class Client:
    """Minimal OpenAI-compatible client with streaming and no HTTP deps."""

    def __init__(self, base: str, model: str | None, timeout: float) -> None:
        self.base = base.rstrip("/")
        self.model = model
        self.timeout = timeout
        self._opener = urllib.request.build_opener(urllib.request.ProxyHandler({}))

    def _post(self, path: str, body: dict, stream: bool = False,
              timeout: float | None = None):
        data = json.dumps(body).encode("utf-8")
        req = urllib.request.Request(
            self.base + path,
            data=data,
            headers={"Content-Type": "application/json", "Accept":
                     "text/event-stream" if stream else "application/json"},
            method="POST",
        )
        try:
            return self._opener.open(req, timeout=timeout or self.timeout)
        except urllib.error.HTTPError as exc:
            detail = exc.read().decode("utf-8", "replace")[:2000]
            raise ProbeError(f"HTTP {exc.code} from {path}: {detail}") from exc
        except urllib.error.URLError as exc:
            raise ProbeError(f"cannot reach {self.base}{path}: {exc.reason}") from exc

    def get_json(self, path: str) -> dict:
        try:
            with self._opener.open(self.base + path, timeout=30) as resp:
                return json.loads(resp.read().decode("utf-8"))
        except (urllib.error.URLError, urllib.error.HTTPError, ValueError) as exc:
            raise ProbeError(f"cannot read {self.base}{path}: {exc}") from exc

    def resolve_model(self, wanted: str | None) -> str:
        if wanted:
            return wanted
        data = self.get_json("/v1/models")
        entries = data.get("data") or []
        if not entries:
            raise ProbeError("server reports no loaded model")
        self.model = entries[0].get("id") or entries[0].get("name")
        return self.model

    def chat(self, messages: list[dict], max_tokens: int,
             on_progress=None, timeout: float | None = None) -> dict:
        body = {
            "model": self.model,
            "messages": messages,
            "max_tokens": max_tokens,
            "cache_prompt": True,
            "stream": True,
        }
        started = time.monotonic()
        chunks: list[str] = []
        reasoning: list[str] = []
        usage: dict = {}
        timings: dict = {}
        finish_reason = None
        started_report = started
        with self._post("/v1/chat/completions", body, stream=True,
                        timeout=timeout) as resp:
            for raw in resp:
                line = raw.decode("utf-8", "replace").strip()
                if not line or not line.startswith("data:"):
                    continue
                payload = line[5:].strip()
                if payload == "[DONE]":
                    break
                try:
                    event = json.loads(payload)
                except ValueError:
                    continue
                if event.get("usage"):
                    usage = event["usage"]
                if event.get("timings"):
                    # Later chunks carry cumulative totals; keep the latest.
                    timings = event["timings"]
                for choice in event.get("choices") or []:
                    if choice.get("finish_reason"):
                        finish_reason = choice["finish_reason"]
                    delta = choice.get("delta") or {}
                    if delta.get("content"):
                        chunks.append(delta["content"])
                    if delta.get("reasoning_content"):
                        reasoning.append(delta["reasoning_content"])
                if on_progress and time.monotonic() - started_report >= 15.0:
                    started_report = time.monotonic()
                    on_progress(len(chunks), time.monotonic() - started)
        elapsed = time.monotonic() - started
        return {
            "content": "".join(chunks),
            "reasoning": "".join(reasoning),
            "usage": usage,
            "timings": timings,
            "finish_reason": finish_reason,
            "elapsed_s": elapsed,
        }

    def busy_slots(self) -> list[dict] | None:
        """Slots with a request in flight, or None if /slots is unavailable.

        The server serves one slot, so a probe sent while another client is
        generating just queues behind it; that would measure the wrong thing.
        """
        try:
            data = self.get_json("/slots")
        except ProbeError:
            return None
        if not isinstance(data, list):
            return None
        return [s for s in data if isinstance(s, dict) and s.get("is_processing")]

    def wait_idle(self, poll_s: float = 5.0, timeout_s: float = 3600.0) -> bool:
        deadline = time.monotonic() + timeout_s
        announced = False
        while time.monotonic() < deadline:
            busy = self.busy_slots()
            if not busy:
                return True
            if not announced:
                print("preflight: server is busy; waiting for the slot to free up "
                      "(Ctrl-C to abort)", flush=True)
                announced = True
            time.sleep(poll_s)
        return False


def build_prompt(target_tokens: int, needle_at: float, nonce: str, label: str,
                 chars_per_token: float, rng: random.Random) -> str:
    """A ~`target_tokens` document with the needle sentence at `needle_at`.

    `needle_at` is the fraction of the document's characters that precede the
    needle (0 = first thing, 1 = last), which is close enough to a token depth at
    the sizes tested and needs no client-side tokenizer.
    """
    head = "=== FIELD RECORDS ===\n"
    needle_line = NEEDLE_TEMPLATE.format(label=label, nonce=nonce) + "\n"
    tail = "\n=== END OF RECORDS ===\n"
    total_chars = target_tokens * chars_per_token
    depth = min(max(needle_at, 0.0), 1.0)
    mid_chars = int(depth * total_chars)
    before = max(mid_chars - len(needle_line), 0)
    after = max(int(total_chars) - mid_chars, 0)
    return (
        head
        + filler_text(before, rng)
        + "\n"
        + needle_line
        + filler_text(after, rng)
        + tail
    )


def filler_text(chars: int, rng: random.Random) -> str:
    parts: list[str] = []
    size = 0
    i = 0
    while size < chars:
        i += 1
        tmpl = rng.choice(FILLER_SENTENCES)
        line = tmpl.format(
            minute=f"{rng.randrange(0, 60):02d}",
            pallet=f"P-{rng.randrange(1000, 9999)}",
            bay_a=f"B{rng.randrange(1, 40)}",
            bay_b=f"B{rng.randrange(1, 40)}",
            sheet=rng.randrange(100000, 999999),
            count=rng.randrange(10, 999),
            count2=rng.randrange(10, 999),
        )
        parts.append(f"Entry {i}. {line}")
        size += len(parts[-1]) + 1
    return "\n".join(parts)


def make_prompt(target_tokens: int, needle_at: float, nonce: str, label: str,
                chars_per_token: float, rng: random.Random) -> str:
    return build_prompt(target_tokens, needle_at, nonce, label,
                        chars_per_token, rng)


QUESTION = ("What is the {label} for this document? Reply with the code only.")
SYSTEM = ("You answer questions about a long document. Reply with only the "
          "requested code, with no explanation and no extra words.")
ANSWER_SUFFIX = "\n\nQuestion: {question}\nAnswer:"


def run_probe(client: Client, *, want_tokens: int, needle_at: float, max_tokens: int,
              chars_per_token: float, rng: random.Random, retries: int,
              tolerance: float, verbose: bool, on_progress=None) -> dict:
    """Size the prompt to `want_tokens` (within tolerance) and grade the answer."""
    label = "access phrase"
    attempt = 0
    ratio = chars_per_token
    while True:
        attempt += 1
        nonce = f"{rng.choice(NONCE_WORDS)}-{rng.randrange(10, 100)}"
        question = QUESTION.format(label=label)
        document = make_prompt(want_tokens, needle_at, nonce, label, ratio, rng)
        messages = [
            {"role": "system", "content": SYSTEM},
            {"role": "user", "content": document + ANSWER_SUFFIX.format(question=question)},
        ]
        result = client.chat(messages, max_tokens, on_progress=on_progress)
        usage = result.get("usage") or {}
        prompt_n = int(usage.get("prompt_tokens") or 0)
        hit = nonce.lower() in (result["content"] or "").lower()
        off = abs(prompt_n - want_tokens) / max(want_tokens, 1)
        # Re-aim when the estimate missed the requested size; a miss at the wrong
        # size would not be a fair test either way.
        if off > tolerance and attempt <= retries and prompt_n > 0:
            # The document overhead is negligible at these sizes, so the observed
            # error is almost entirely filler scaling.
            new_ratio = ratio * (want_tokens / prompt_n)
            if verbose:
                print(f"    resize: asked ~{want_tokens} got {prompt_n} "
                      f"(chars/token {ratio:.2f} -> {new_ratio:.2f})", flush=True)
            ratio = new_ratio
            continue
        return {
            "want_tokens": want_tokens,
            "prompt_tokens": prompt_n,
            "needle_at": needle_at,
            "nonce": nonce,
            "hit": hit,
            "answer": (result["content"] or "").strip(),
            "reasoning_chars": len(result.get("reasoning") or ""),
            "finish_reason": result.get("finish_reason"),
            "elapsed_s": result["elapsed_s"],
            "usage": usage,
            "timings": result.get("timings") or {},
            "sized": off <= tolerance,
            "attempts": attempt,
        }


def calibrate(client: Client, rng: random.Random,
              probe_tokens: int = 1500) -> float:
    """Estimate characters per token from one short, cheap request."""
    filler = filler_text(int(probe_tokens * 3.6), rng)
    payload = "ping " + filler
    messages = [
        {"role": "system", "content": "Reply with only: OK"},
        {"role": "user", "content": payload},
    ]
    result = client.chat(messages, 2, timeout=min(120.0, client.timeout))
    prompt_n = int((result.get("usage") or {}).get("prompt_tokens") or 0)
    if prompt_n <= 0:
        raise ProbeError("server did not report prompt_tokens during calibration")
    # Subtract the chat-template/system overhead, roughly 20 tokens here.
    ratio = len(payload) / max(prompt_n - 20, 1)
    print(f"calibration: {prompt_n} tokens for {len(payload)} chars "
          f"(~{ratio:.3f} chars/token)", flush=True)
    return ratio


def human(n: int) -> str:
    return f"{n / 1024:.1f}k"


def main() -> int:
    ap = argparse.ArgumentParser(
        description="Probe a running llama-kvmem server with long prompts.")
    ap.add_argument("max_tokens", type=int,
                    help="maximum prompt size in tokens (the only required argument)")
    ap.add_argument("--url", default=DEFAULT_URL)
    ap.add_argument("--model", default=None,
                    help="model id; default: first entry from /v1/models")
    ap.add_argument("--max-new", type=int, default=64,
                    help="generation cap per probe (default 64)")
    ap.add_argument("--sizes", default="",
                    help="comma-separated probe sizes; default 1/4,1/2,3/4,1 of MAX")
    ap.add_argument("--extra-positions", default="0.05,0.5,0.95",
                    help="needle depths probed at MAX (default 0.05,0.5,0.95)")
    ap.add_argument("--tolerance", type=float, default=0.10,
                    help="accepted |actual-want|/want for a probe size (default 0.10)")
    ap.add_argument("--retries", type=int, default=2,
                    help="sizing retries per probe (default 2)")
    ap.add_argument("--wait-idle", action="store_true",
                    help="wait for the server slot to be free before probing")
    ap.add_argument("--seed", type=int, default=1234)
    ap.add_argument("--timeout", type=float, default=None,
                    help="HTTP timeout seconds; default 900 or max_tokens/25, whichever larger")
    ap.add_argument("--json-out", type=Path, default=None,
                    help="write full results as JSON here")
    ap.add_argument("-q", "--quiet", action="store_true")
    args = ap.parse_args()

    if args.max_tokens < 256:
        ap.error("max_tokens must be at least 256")

    timeout = args.timeout or max(900.0, args.max_tokens / 25.0)
    client = Client(args.url, args.model, timeout)
    try:
        model = client.resolve_model(args.model)
    except ProbeError as exc:
        print(f"FAIL: {exc}", file=sys.stderr)
        return 2

    if args.sizes:
        sizes = sorted({int(x) for x in args.sizes.split(",") if x.strip()})
    else:
        sizes = sorted({max(1, args.max_tokens * num // den)
                        for num, den in ((1, 4), (1, 2), (3, 4), (1, 1)) if num * args.max_tokens // den >= 256})
        if not sizes:
            sizes = [args.max_tokens]
    sizes = [s for s in sizes if s <= args.max_tokens]
    if not sizes:
        print("FAIL: no probe size at or below max_tokens", file=sys.stderr)
        return 2

    positions = [float(x) for x in args.extra_positions.split(",") if x.strip()] or [0.5]

    print(f"target   : {args.url}  model={model}")
    print(f"max ctx  : {args.max_tokens} tokens; probes at "
          f"{', '.join(human(s) for s in sizes)}")
    print(f"positions: scaling probes at depth 0.5; MAX also at "
          f"{', '.join(f'{p:g}' for p in positions)}")
    print(f"timeout  : {timeout:.0f}s per request\n", flush=True)

    busy = client.busy_slots()
    if busy:
        detail = busy[0].get("n_prompt_tokens") or busy[0].get("n_prompt_tokens_processed")
        print(f"preflight: {len(busy)} slot(s) already processing "
              f"(n_prompt_tokens={detail}); probes would queue behind that request")
        if not args.wait_idle:
            print("preflight: continuing anyway — pass --wait-idle to block first\n",
                  flush=True)
        elif not client.wait_idle():
            print("FAIL: server still busy; not starting probes", file=sys.stderr)
            return 2
        else:
            print("preflight: slot free, starting\n", flush=True)
    elif busy is None:
        print("preflight: /slots unavailable; cannot tell whether the server is busy\n",
              flush=True)
    else:
        print("preflight: server idle\n", flush=True)

    rng = random.Random(args.seed)
    try:
        ratio = calibrate(client, rng)
    except ProbeError as exc:
        print(f"FAIL: {exc}", file=sys.stderr)
        return 2

    probes: list[tuple[int, float]] = [(s, 0.5) for s in sizes]
    for depth in positions:
        if depth != 0.5:
            probes.append((args.max_tokens, depth))

    rows: list[dict] = []
    for index, (want, depth) in enumerate(probes, 1):
        tag = f"probe {index}/{len(probes)} want={human(want)} depth={depth:g}"
        print(f"--- {tag}", flush=True)

        def progress(n_chunks: int, elapsed: float, _want=want) -> None:
            if not args.quiet:
                print(f"    ... {elapsed:.0f}s prefill/generation, "
                      f"{n_chunks} chunks", flush=True)

        started = time.monotonic()
        try:
            row = run_probe(
                client, want_tokens=want, needle_at=depth,
                max_tokens=args.max_new, chars_per_token=ratio, rng=rng,
                retries=args.retries, tolerance=args.tolerance,
                verbose=not args.quiet, on_progress=progress,
            )
        except ProbeError as exc:
            row = {"want_tokens": want, "needle_at": depth, "hit": False,
                   "prompt_tokens": 0, "error": str(exc)}
        wall = time.monotonic() - started
        row["wall_s"] = wall
        row["index"] = index
        rows.append(row)

        if row.get("error"):
            print(f"    FAIL: {row['error']}  ({wall:.0f}s)", flush=True)
            continue
        ratio = max(0.5, ratio * (want / row["prompt_tokens"])) if row["prompt_tokens"] else ratio
        print(
            f"    n_prompt={row['prompt_tokens']} (want {want}, "
            f"{'sized' if row['sized'] else 'OFF-TARGET'})  "
            f"hit={row['hit']}  finish={row['finish_reason']}  "
            f"{wall:.0f}s",
            flush=True,
        )
        print(f"    answer: {row['answer'][:160]!r}", flush=True)

    print("\n================ LONG CONTEXT PROBE ================")
    print(f"{'want':>9} {'n_prompt':>9} {'depth':>6} {'hit':>4} {'sized':>6} "
          f"{'wall/s':>8}  answer")
    ok = True
    for row in rows:
        sized = "yes" if row.get("sized") else ("-" if row.get("error") else "no")
        answer = row.get("answer") or row.get("error", "")
        print(f"{row['want_tokens']:>9} {row.get('prompt_tokens', 0):>9} "
              f"{row['needle_at']:>6g} {'Y' if row.get('hit') else 'n':>4} "
              f"{sized:>6} {row['wall_s']:>8.0f}  {answer[:60]!r}")
        if not row.get("hit"):
            ok = False

    if args.json_out:
        args.json_out.parent.mkdir(parents=True, exist_ok=True)
        args.json_out.write_text(json.dumps(
            {"url": args.url, "model": model, "max_tokens": args.max_tokens,
             "chars_per_token": ratio, "probes": rows}, indent=2) + "\n",
            encoding="utf-8")
        print(f"\nwrote {args.json_out}")

    print("\n### Long-context probe: context size, time and throughput\n")
    print("| ctx (tokens) | depth | wall (s) | prefill (tok/s) | decode (tok/s) | "
          "gen tokens | finish | answer | hit |")
    print("|---:|---:|---:|---:|---:|---:|---|---|:--:|")
    for row in rows:
        t = row.get("timings") or {}
        usage = row.get("usage") or {}
        ctx = row.get("prompt_tokens") or row["want_tokens"]
        prefill = t.get("prompt_per_second")
        decode = t.get("predicted_per_second")
        gen = t.get("predicted_n") or usage.get("completion_tokens") or 0
        answer = (row.get("answer") or row.get("error") or "").replace("|", "\\|")
        prefill_s = f"{prefill:.1f}" if isinstance(prefill, (int, float)) else "n/a"
        decode_s = f"{decode:.1f}" if isinstance(decode, (int, float)) else "n/a"
        print(f"| {ctx} | {row['needle_at']:g} | {row['wall_s']:.0f} | {prefill_s} "
              f"| {decode_s} | {gen} | {row.get('finish_reason') or '-'} "
              f"| {answer[:40]!r} | {'yes' if row.get('hit') else 'NO'} |")
    print("\nwall = full request round trip; prefill/decode are the server's own "
          "`timings` (tok/s); ctx is the measured `usage.prompt_tokens`.")

    if ok:
        print(f"\nPASS: retrieved the buried phrase in all {len(rows)} prompts "
              f"up to {human(args.max_tokens)} tokens")
        return 0
    failed = [f"{human(r['want_tokens'])}@{r['needle_at']:g}" for r in rows if not r.get("hit")]
    print(f"\nFAIL: no answer at {', '.join(failed)}", file=sys.stderr)
    return 1


if __name__ == "__main__":
    raise SystemExit(main())

@terry GA 用nginx反代一下，国内也可以访问

新开一个会话，选择“创造模式“ 输入：

创建一个新的插件： 当会话因为“已达到输出 token 上限”中断时， 自动输入“继续”.

会自动为你编写一个插件并启用

另外， 修改settings.yaml， 在模型下面修改
maxTokens：匹配你的模型上下文

如：

llm-pi-ai:
  providers:
    llamacpp:
      displayName: Local llama.cpp
      api: openai-completions
      baseURL: 
      compat:
        maxTokensField: max_tokens
      defaultInput: [ text, image ]
      models:
        - id: qwen3.8-27b-q5km
          maxTokens: 143360

compat很重要， 否则DSH不发送maxTokens

@coolstar 是的，现在拼多多已经不是价格最低，但是保障最好的， 售后还是京东自营最好。

@coolstar 是的

@coolstar 之前官网是有的， 我下单前查过。

我仔细看了你的贴图，就是那个天猫店。